Soul and Savings Home Tool
Tile Calculator: How Many Tiles Do You Need?
Planning a flooring, bathroom or backsplash project? Use our free Tile Calculator to estimate how many tiles and boxes you need. Enter your measurements, select your tile size, adjust the waste allowance and calculate your material costs.
Living Room 10 ft × 10 ft
12 × 12 in tile, 10% waste → 110 tiles to buy
Wall 10 ft × 8 ft
Minus door (3 ft × 7 ft) and window (3 ft × 4 ft) → 47 sq ft net
11 boxes × $35
11 boxes at $35 per box = $385 material cost
How it works
- Pick a mode — quick for one room, advanced for several surfaces.
- Enter your measurements and tile size — the calculator converts units for you.
- Adjust the waste allowance for your layout pattern, then see tiles, boxes and cost update live.
- Save, print or download your material report.
Results are estimates. Actual quantities depend on the tile layout, product packaging and installation conditions.
Before you order tile for a floor, wall, shower, or backsplash, you need to know how much to buy. Order too little and you run out mid-job. A tile calculator removes the guesswork: enter the area, tile size, and waste allowance, and it works out the tiles and boxes you need.
Whether you call it a floor tile calculator, a flooring calculator tile, or a tile sq ft calculator, the method is the same: measure the area, divide by one tile’s coverage, add waste, and round up.
What Is a Tile Calculator?
A tile calculator is a free online tool that estimates how many tiles a project needs. Enter the area, tile size, and waste percentage, and it gives you the tile and box counts.
The result is an area-based estimate, not an exact cut plan: the final quantity also depends on layout, packaging, and installation conditions.
How to Calculate How Many Tiles You Need
To calculate tile, divide the area in square feet by the area one tile covers. A 12 by 12 inch tile covers 1 square foot, so a 100 square foot room needs 100 tiles before waste, plus waste for cuts.
Take a 10 by 10 foot room: 10 times 10 is 100 square feet. With 12 by 12 inch tiles, add 10 percent waste and buy 110. That answers how many tiles do I need for a room this size.
How to Calculate Tile Square Footage
Tile square footage is the area of the surface you plan to tile. For a rectangle, multiply length by width: a 10 by 12 foot room is 120 square feet. Convert feet and inches first: 6 inches is half a foot, so 12 feet 6 inches is 12.5 feet. Every tile square footage calculator starts from this one area figure.
For an L-shaped room, split the shape into rectangles, work out each part, and add them together. A Square Footage Calculator can help with complex rooms.
How Much Extra Tile Should You Buy?
Always buy more tile than the exact area. Cutting tiles to fit edges and corners leaves offcuts you cannot reuse, and tiles can chip. The extra is a waste allowance, a starting estimate you adjust to the job, not a fixed rule.
Allow about 10 percent extra for a straight or offset layout, about 15 percent for diagonal or herringbone, and about 20 percent for a complex layout. A net area of 200 square feet at 15 percent needs 230 square feet of purchasing coverage: 200 times 1.15 is 230.
How to Calculate the Number of Tile Boxes You Need
Tiles are sold by the box. Divide the purchasing coverage, the area plus waste, by the coverage printed on one box, then round up.
For example, 132 square feet divided by 12 square feet per box is 11 boxes. If the answer is not whole, round up: 10.4 boxes means buying 11. That answers how many boxes of tile do I need.
How to Calculate Floor Tile Requirements
Floor tile follows the same method: measure the floor, divide by one tile’s coverage, add waste, and round up. Measure each room on its own, then add the totals.
A room 10 feet by 12 feet is 120 square feet. With 12 by 24 inch tiles, each covering 2 square feet, you need 60 tiles before waste. Add 10 percent waste and buy 66.
How to Calculate Wall Tile Requirements
Wall tile is measured like floor tile, with one extra step: subtract the openings. Measure the full wall, then subtract every door and window. A tile calculator for walls does this subtraction for you.
A wall 10 by 8 feet is 80 square feet. A 3 by 7 foot door is 21 square feet, a 3 by 4 foot window 12, so the net area is 80 minus 21 minus 12, which is 47 square feet. Add waste, then divide by one tile’s coverage.
How to Calculate Bathroom and Shower Tiles
A bathroom tile calculator handles floors and walls together, while a shower tile calculator focuses on the shower, where every wall is tiled and the cutting is heavy. Measure each wall, height times width, then add the shower floor.
Subtract any window, and add extra for niches, shelves, and the curb, since each means more cuts. Measure the full height: shower walls are often tiled to the ceiling. Start with a 15 percent waste allowance.
How to Calculate Kitchen Backsplash Tiles
A backsplash tile calculator works on a small area with a lot of cutting. Measure the run length times its height, from the countertop to the underside of the cabinets. A 10 foot run 1.5 feet high is 15 square feet.
Subtract any window or range hood that breaks the run. Each outlet needs a cut tile, so allow a waste allowance at the higher end of the range.
How Tile Size Affects the Number of Tiles Required
Tile size changes the tile count directly, because a bigger tile covers more area.
- 6 by 6 inch: 0.25 square feet.
- 12 by 12 inch: 1 square foot.
- 12 by 24 inch: 2 square feet.
- 24 by 24 inch: 4 square feet.
A 100 square foot room needs 400, 100, 50, or 25 of these tiles before waste. Larger tiles mean fewer grout lines, but each cut wastes more.
Understanding Tile Layout Patterns and Grout Spacing
Layout changes how much tile is cut and wasted. A straight grid cuts mainly at the edges, an offset pattern adds cuts at row ends, and a diagonal layout cuts every edge tile at an angle. Herringbone cuts almost every tile at the ends, so a tile layout calculator asks about the pattern.
Grout spacing is part of the layout, not the purchase quantity. Grout lines sit between tiles, so they do not reduce the number of tiles to buy, and it is never added to the tile face dimensions. A tile grout calculator estimates the grout from the joint width and depth.
How to Estimate Tile, Grout and Adhesive Costs
Once you know the box count, the tile cost is simple multiplication: 11 boxes at 35 dollars each, 11 times 35, is 385 dollars. A tile installation cost calculator builds on that figure by adding materials and labour.
Grout and adhesive are estimated from the area and the coverage printed on the packaging. Grout coverage depends on tile size and joint width and depth. Adhesive, also called mortar, is sold by coverage per bag, and a tile mortar calculator uses the area and trowel size to estimate bags.
Common Tile Measurement Mistakes
Watch for these seven mistakes.
- Forgetting openings: subtract doors and windows from wall areas.
- Mixing units: inches entered as feet throws the area out.
- Buying too few tiles: the exact area leaves nothing for cuts.
- Applying waste twice: add the allowance once, to the net area.
- Assuming identical box coverage: coverage varies by product.
- Combining different products: shades and sizes can differ between batches.
- Ignoring pattern cuts: diagonal and herringbone need a larger waste allowance.
Quantities depend on layout, packaging, and installation conditions.
You can find more free tools on Soul and Savings.
Frequently Asked Questions
Here are the answers to the questions people ask most often.
How many tiles do I need for a room?
Multiply length by width for the area, divide by one tile’s coverage, add waste, and round up. A 10 by 10 foot room with 12 by 12 inch tiles needs 100 tiles, 110 with 10 percent waste.
How do I calculate the number of tiles required?
Divide the area by one tile’s coverage, add waste, and round up. Measure length and width in the same unit, multiply them, then add about 10 percent waste.
How much extra tile should I buy?
Allow about 10 percent extra for a straight or offset layout, about 15 percent for diagonal or herringbone, and about 20 percent for a complex layout. These are adjustable starting estimates.
How many square feet does one tile cover?
A 6 by 6 inch tile covers 0.25 square feet, a 12 by 12 covers 1, a 12 by 24 covers 2, and a 24 by 24 covers 4. For other sizes, divide length and width by 12 and multiply.
How many tiles are in a box?
There is no standard number of tiles in a box. It varies by product and tile size, and the number is printed on the box. Order by the coverage per box, also printed on the box.
How do I calculate the number of tile boxes?
Divide your required coverage, the area plus waste, by the coverage of one box, then round up. For example, 132 square feet divided by 12 square feet per box is 11 boxes.
How do I calculate wall tile requirements?
Measure the wall, height times width, then subtract every door and window that will not be tiled. A 10 by 8 foot wall is 80 square feet; minus a 21 square foot door and a 12 square foot window, the net area is 47.
How do I calculate shower tile requirements?
Measure each shower wall, height times width, add them together, then add the shower floor. Subtract any window, and add extra for niches and the curb. Start with 15 percent waste.
How do I calculate backsplash tiles?
Measure the run length times its height, usually from the countertop to the underside of the cabinets. Subtract any window or range hood, and allow a waste allowance at the higher end, because outlets mean many cuts.
Does grout spacing affect the tile count?
No. Grout spacing does not reduce the number of tiles you need to buy. Grout lines sit between tiles, so the purchase quantity is worked out from the tile face dimensions alone.
How much waste should I allow for herringbone tile?
Allow about 15 percent extra as a starting point for herringbone. Herringbone cuts almost every tile at the pattern ends, so it wastes more than a straight grid.
Can I calculate multiple rooms together?
Yes. Measure each room on its own, work out the tiles for each one, and add the totals together. Do not add the lengths first and then multiply.
Can I use metric measurements?
Yes. Measure in metres or centimetres and keep the same unit. A 30 by 30 centimetre tile covers 0.09 square metres. One square metre is 10.764 square feet.
Is this Tile Calculator free?
Yes, this Tile Calculator is completely free to use, with no sign-up and no payment needed. You can use it as many times as you like.
How many tiles do I need for a room?
Multiply length by width for the area, divide by one tile's coverage, add waste, and round up. A 10 by 10 foot room with 12 by 12 inch tiles needs 100 tiles, 110 with 10 percent waste.
How do I calculate the number of tiles required?
Divide the area by one tile's coverage, add waste, and round up. Measure length and width in the same unit, multiply them, then add about 10 percent waste.
How much extra tile should I buy?
Allow about 10 percent extra for a straight or offset layout, about 15 percent for diagonal or herringbone, and about 20 percent for a complex layout. These are adjustable starting estimates.
How many square feet does one tile cover?
A 6 by 6 inch tile covers 0.25 square feet, a 12 by 12 covers 1, a 12 by 24 covers 2, and a 24 by 24 covers 4. For other sizes, divide length and width by 12 and multiply.
How many tiles are in a box?
There is no standard number of tiles in a box. It varies by product and tile size, and the number is printed on the box. Order by the coverage per box, also printed on the box.
How do I calculate the number of tile boxes?
Divide your required coverage, the area plus waste, by the coverage of one box, then round up. For example, 132 square feet divided by 12 square feet per box is 11 boxes.
How do I calculate wall tile requirements?
Measure the wall, height times width, then subtract every door and window that will not be tiled. A 10 by 8 foot wall is 80 square feet; minus a 21 square foot door and a 12 square foot window, the net area is 47.
How do I calculate shower tile requirements?
Measure each shower wall, height times width, add them together, then add the shower floor. Subtract any window, and add extra for niches and the curb. Start with 15 percent waste.
How do I calculate backsplash tiles?
Measure the run length times its height, usually from the countertop to the underside of the cabinets. Subtract any window or range hood, and allow a waste allowance at the higher end, because outlets mean many cuts.
Does grout spacing affect the tile count?
No. Grout spacing does not reduce the number of tiles you need to buy. Grout lines sit between tiles, so the purchase quantity is worked out from the tile face dimensions alone.
How much waste should I allow for herringbone tile?
Allow about 15 percent extra as a starting point for herringbone. Herringbone cuts almost every tile at the pattern ends, so it wastes more than a straight grid.
Can I calculate multiple rooms together?
Yes. Measure each room on its own, work out the tiles for each one, and add the totals together. Do not add the lengths first and then multiply.
Can I use metric measurements?
Yes. Measure in metres or centimetres and keep the same unit. A 30 by 30 centimetre tile covers 0.09 square metres. One square metre is 10.764 square feet.
Is this Tile Calculator free?
Yes, this Tile Calculator is completely free to use, with no sign-up and no payment needed. You can use it as many times as you like.

