Soul and Savings Home Tool
Paint Calculator: How Much Paint Do I Need?
Use our free Paint Calculator to estimate gallons, quarts and paint cost for walls, ceilings and trim. Enter room sizes, openings, coats and paint coverage.
Room 12 ft × 10 ft
8 ft walls, 1 door + 2 windows, 2 coats at 375 sq ft/gal → about 1.61 gallons
Ceiling 12 ft × 10 ft
120 sq ft ceiling area, calculated with its own coverage
1.95 gallons needed
Walls plus ceiling for the same room: 2 x 1-gallon = 2.0 gallons, 0.05 gallons left over
How it works
- Pick a tab — One Room for a single room, Multiple Rooms for a project, More for advanced surfaces.
- Enter your measurements, openings and coats — the calculator converts units for you.
- Add primer, container sizes and prices to see cans and costs update live.
- Save, print or download your shopping list and project report.
Results are estimates. Actual quantities depend on the paint product, surface condition and application method.
Painting a room is one of the cheapest ways to change how a home feels, but the paint aisle can still catch you out. Buy too little and you run out halfway through the second coat; buy too much and you are left with half-used cans in the garage. A Paint Calculator takes the guesswork out of it: enter your measurements, and it works out how much paint you need before you leave the house.
This guide walks through the same maths the calculator uses, so you can check the result yourself. Whether you call it a Paint Estimator or a Paint Quantity Calculator, the method is the same: measure, subtract the openings, multiply by the coats, and divide by the coverage on the can.
How Much Paint Do I Need?
The short answer is that most rooms need one to two gallons for two coats, but the honest answer is that it depends on your room. A small bedroom and a large open-plan living room are very different jobs, and the only way to know is to measure. That is the question behind How Much Paint Do I Need, and the first thing any good estimate should answer.
Start with the walls: measure each wall’s length, multiply by the ceiling height, and add the four walls together for the gross wall area. Then subtract the doors and windows, multiply by the number of coats, and divide by the coverage per gallon on your paint can.
How to Calculate Paint for a Room
Calculating paint for a room comes down to four steps. First, find the wall area. Second, subtract anything you will not paint. Third, multiply by the number of coats. Fourth, divide by the coverage per gallon. The result is the Paint Needed per Room, in gallons.
- Measure each wall: length times height. A 12 foot wall with 8 foot ceilings is 96 square feet.
- Add the four walls together for the gross area.
- Subtract doors and windows, each measured as width times height.
- Multiply the net area by the number of coats, usually two.
- Divide by the coverage per gallon, often about 375 square feet for interior wall paint.
A Paint Calculator Square Feet approach like this works for any rectangular room, and just as well in metres. Keep every measurement in the same unit before you start multiplying. For an awkwardly shaped room, Calculate Your Room’s Square Footage first, then bring that figure back here.
How Many Square Feet Does One Gallon of Paint Cover?
Many interior wall paints cover about 350 to 400 square feet per gallon, so 375 is a sensible starting assumption for planning. But that is the coverage a manufacturer expects on a smooth, primed surface in one coat, and real walls are rarely that tidy.
A rough or porous surface drinks more paint, so textured walls, bare plaster, and new drywall can drop coverage closer to 300 square feet per gallon. The product label always takes priority over any general figure: check the coverage printed on your can and use that number in the calculator.
A Paint Coverage Calculator uses the coverage figure you enter, so if your can says 350 square feet per gallon, enter 350 and let the maths follow the label.
How to Calculate Paint for Walls and Ceilings
Walls and ceilings are calculated separately, because they often use different paint and different coverage. Work out the wall area first, then treat the ceiling as its own surface.
For the walls, multiply the perimeter by the ceiling height: a 12 by 10 foot room has a 44 foot perimeter, so with 8 foot ceilings the gross wall area is 352 square feet. Subtract the doors and windows for the net wall area.
For the ceiling, multiply length by width: a 12 by 10 foot ceiling is 120 square feet. Ceiling paint is usually a flat finish with its own coverage figure, so enter that number rather than reusing the wall paint figure. A Wall Paint Calculator handles the walls; run the ceiling as a separate calculation.
Do You Need to Subtract Doors and Windows?
Yes. A door you will not paint is 21 square feet of wall you do not need to cover, and a window is 15. Skip the subtraction and you can easily overbuy by a quarter of a gallon in a single room.
Measure each opening as width times height: a standard interior door is 3 by 7 feet, or 21 square feet, and a typical window is 3 by 5 feet, or 15 square feet. Add the openings together and subtract the total from the gross wall area. A Paint Calculator for Walls does this subtraction for you when you enter the number and size of your doors and windows.
One exception: if you are painting the doors and frames the same colour, count them separately rather than leaving them in the wall area. And if a wall is mostly glass, such as patio doors, subtract the whole glazed area.
How Many Coats of Paint Do You Need?
Two coats is the standard for most interior walls, and it is the number this calculator assumes unless you change it. The first coat covers and seals; the second evens out the colour and gives the finish its depth.
One coat can be enough when you are repainting the same colour, or a very close shade, over a wall that is already in good condition. You may need three coats when you are going from dark to light, covering a bold colour, or painting over bare plaster or new drywall that has not been primed. Primer, covered in the next section, is usually the cheaper fix for a dark wall showing through.
How Much Primer Do You Need?
Primer is optional in the calculator, but skipping it can cost more paint than it saves: it seals porous surfaces so the topcoat goes further and the colour stays true.
You should prime bare drywall, new plaster, patched areas, stained walls, and any surface where you are making a big colour change. You can usually skip primer when you are repainting a sound wall in a similar colour.
Primer covers about 300 square feet per gallon as a starting assumption, a little less than most topcoats, because it is designed to soak in and seal. Work it out the same way as paint: net wall area divided by 300, for one coat. Most priming jobs need a single coat.
Interior vs. Exterior Paint Coverage
Interior and exterior paint do not cover the same area per gallon, and they are not interchangeable. Interior paint is formulated for smooth, sheltered walls, while exterior paint is built to grip rougher surfaces and survive the weather.
An Interior Paint Calculator usually starts from about 350 to 400 square feet per gallon for walls in good condition. Exterior surfaces are rougher and more absorbent, so an Exterior Paint Calculator should start closer to 300 square feet per gallon, and even less on rough brick, stucco, or weathered wood, where the paint sinks into every crevice.
Exterior jobs also have more to measure: every side of the house, gables, soffits, and trim, each with its own openings to subtract. Measure each elevation separately and add them together. And always use paint labelled for exterior use outside: interior paint will not survive the weather.
How Much Extra Paint Should You Buy?
Buy a little more than the exact calculation. The calculator’s allowance is set to 0% by default, so the number it gives you is the exact amount: add your own allowance on top if you want a safety margin.
About 10 percent extra is a sensible starting point for most rooms. It covers touch-ups, a slightly thirsty wall, and the paint left in the roller tray. A Paint Quantity Calculator result of 1.61 gallons with a 10 percent allowance becomes about 1.77 gallons, and since paint is sold in whole and part gallons, you would buy 2 gallons.
Keep the leftover sealed and labelled with the room and colour, somewhere frost-free, for touch-ups later.
Worked Example: A 12 x 10 Room
Here is the full calculation for a 12 by 10 foot bedroom with 8 foot ceilings, one door, and two windows, using 375 square feet per gallon and two coats.
- Perimeter: 2 times (12 + 10) = 44 feet.
- Gross wall area: 44 times 8 = 352 square feet.
- Openings: one door 3 times 7 = 21 square feet, plus two windows 2 times (3 times 5) = 30 square feet, a total of 51 square feet.
- Net wall area: 352 minus 51 = 301 square feet.
- Two coats: 301 times 2 = 602 square feet to cover.
- Paint needed: 602 divided by 375 = 1.6053 gallons, or about 1.61 gallons.
- With a 10 percent allowance: 1.6053 times 1.10 = about 1.77 gallons, so buy 2 gallons.
The ceiling is calculated separately: 12 times 10 is 120 square feet, and at 350 square feet per gallon one coat needs about 0.34 gallons.
Paint Coverage Guide
These are starting assumptions for planning, not guarantees. Always check the label on your can, because coverage varies by brand, finish, and surface.
- Interior wall paint, smooth surface: about 350 to 400 square feet per gallon.
- Interior wall paint, textured or porous surface: about 300 square feet per gallon.
- Primer: about 300 square feet per gallon.
- Exterior paint, smooth siding: about 300 to 350 square feet per gallon.
- Exterior paint, rough brick or stucco: about 250 to 300 square feet per gallon.
- Ceiling paint: about 300 to 350 square feet per gallon.
A Paint Coverage Calculator is only as good as the coverage figure you give it: if the label says 300, use 300.
Helpful Painting Tips
A good estimate is only half the job. These tips help the paint you buy go further and look better.
- Measure twice, then measure the openings: the most common mistake is forgetting to subtract doors and windows.
- Stir the paint well and pour a working amount into a tray rather than painting from the can.
- Cut in the edges with a brush first, then roll the large areas while the cut-in is still wet.
- Keep a wet edge: work in sections and roll back over the previous section before it dries.
- Save the leftover paint for touch-ups, labelled with the room, colour, and finish.
If you are planning a bigger project, Try Our Free Tile Calculator for the floors once the walls are done.
Frequently Asked Questions
Here are the answers to the questions people ask most often.
How much paint do I need for a room?
Measure the walls, subtract the doors and windows, multiply by the number of coats, and divide by the coverage on the can. A typical 12 by 10 foot room with 8 foot ceilings needs about 1.61 gallons for two coats at 375 square feet per gallon, or about 1.77 gallons with a 10 percent allowance. Enter your own measurements in the calculator for an exact figure for your room.
How many square feet does one gallon of paint cover?
Many interior wall paints cover about 350 to 400 square feet per gallon on a smooth, primed surface, while primer covers about 300 and textured, porous, or exterior surfaces are closer to 300. These are starting assumptions, not guarantees: the coverage printed on your can takes priority, and rough or unprimed surfaces will use more paint.
How much paint do I need for a 12 x 12 room?
A 12 by 12 foot room with 8 foot ceilings has a gross wall area of 384 square feet: the perimeter is 48 feet, times 8 feet high. Subtract one door and two windows, about 51 square feet, for a net area of about 333 square feet. Two coats means covering 666 square feet, and at 375 square feet per gallon that is about 1.78 gallons before any allowance, so buy 2 gallons.
How do I calculate wall paint?
Multiply the perimeter of the room by the ceiling height for the gross wall area, subtract the area of every door and window, multiply by the number of coats, and divide by the coverage per gallon. For example, 44 feet of perimeter times 8 feet high is 352 square feet, minus 51 square feet of openings is 301, times two coats is 602, divided by 375 is about 1.61 gallons.
Do paint calculators subtract doors and windows?
This one does. Enter the number and size of your doors and windows and the calculator deducts their area from the wall total before working out the paint. A standard door is 3 by 7 feet and a typical window is 3 by 5 feet, so each opening you skip can throw the estimate out by 15 to 21 square feet.
Should I include the ceiling in my paint calculation?
Only if you plan to paint it. The ceiling is optional in the calculator and is worked out separately from the walls, because it usually uses a different paint and coverage. A 12 by 10 foot ceiling is 120 square feet, and at 350 square feet per gallon one coat needs about 0.34 gallons.
How many coats of paint should I use?
Two coats is the standard for most interior walls, and it is what the calculator assumes by default. One coat can be enough over the same or a very similar colour, while three coats may be needed for a dark-to-light change, a bold colour underneath, or bare plaster and new drywall.
Do I need primer before painting?
Not always. Primer is worth it on bare drywall, new plaster, patched or stained areas, and big colour changes, where it seals the surface so the topcoat covers better. You can usually skip it when repainting a sound wall in a similar colour. Primer is optional in the calculator and covers about 300 square feet per gallon.
How much extra paint should I buy?
About 10 percent extra is a sensible starting point for most rooms, to cover touch-ups and a slightly absorbent wall. The calculator's allowance defaults to 0 percent, so the figure it gives is the exact amount: add your allowance on top. A result of 1.61 gallons becomes about 1.77 gallons with 10 percent added, and you would buy 2 gallons.
How do I calculate paint for multiple rooms?
Work out each room on its own, then add the totals together. Do not add the room lengths together first, because the wall areas and openings differ from room to room. If several rooms share the same paint and coverage, you can add their net coated areas together and divide once by the coverage per gallon.
How much paint do I need for exterior walls?
Measure each elevation separately: height times width, minus doors and windows, then add the elevations together and multiply by the number of coats. Exterior paint covers about 300 square feet per gallon as a starting assumption, less on rough brick or stucco, so a 1,000 square foot net exterior area needs about 3.33 gallons per coat at 300 coverage, roughly 6.67 gallons for two coats before any allowance.
Does this paint calculator work in metric units?
Yes. Switch the calculator to metric and enter your measurements in metres or centimetres, and it works out the paint in litres instead of gallons. The maths is the same: area, minus openings, times coats, divided by coverage. One square metre is about 10.764 square feet, and a litre is about 0.264 gallons, if you want to compare with a can labelled in imperial units.

